| WWV250.0 |
Fixed bugs and functions are improved. |
| WWV203.0 |
[Specification change]
1)Add the item of "Basic control" in Network Configuration.
Location: Network > Network Configuration >Other > Basic Control
Function: When using "Basic Control" function in Web Control, login by "Remote Password" is enable/disable.
2) Changed the timing of setting "Web Control Password" and "Remote Password"
2-1) Web Control Password: Password to control/monitor the projector on the Web Control
Less than V2.03: Enter the Network Menu without setting a password.
V2.03 or above: Complete the Network Settings without setting a password.
2-2) Remote Password: Password only available in "Basic Control" on Web Control
Less than V2.03: Enter the Network Menu without setting a password
V2.03 or above: "Basic control" will be set from off to on without setting a password.
3) Add the item of "Batch Setting file write/read" in OSD menu.
Location: Info > Export/Import Batch Settings
Function: Enables export/import of batch setting file during unit is working, which was previously supported only by special key operations* during non-startup.
*Export: Connect the power cord while pressing the [ESC] button.
Import: Connect the power cord while pressing the [MENU] button.
4) Add the language Vietnam.
[Bug Fix]
Fixed a bug that only 8 characters could be entered when entering Remote password from Web control. (Specification is 32 characters.)
This bug does not occur when entering the Remote Password on the OSD menu.
This bug occurs only on V2.01 and V2.02. |
| WWV202.0 |
1) Firmware update via EPM(Epson Projector Management) may fail.
2) Fixed a bug where a laser warning may occur under the following conditions.
The brightness decreases after a certain period of time in the No signal state.
Execute AV mute (shutter) at that timing.
3) After projector main firmware is updated while it has been connected to CCV2, projector may not be connected to CCV2(Crestron Connected V2) when restarting it. |
| WWV201.0 |
[Specification change]
1) The specifications are improved to comply with the Policy for a new cyber laws in UK "Product Security and Telecommunications Infrastructure Act 2022".
2) Update to EPSON logo on startup.
3) Improved distortion operation specifications during lens calibration.
[Usability improvement]
1) A dialog of auto adjustment of simple blending is compliant with all languages.
[Bug Fix]
1) Fixed the symptom where the OSD is partially displayed outside the screen when the screen type is 21:9.
2) Fixed a rare symptom where a black screen was displayed when the projector was started.
3) Fixed a symptom where the projector not work properly when the screen position is moved after changing the screen type. |
| WWV200.0 |
[Specification change]
1) New function "Simple Blending"* is now available!
* This function allows two projectors with external cameras to create a blend using a single wired LAN ethernet cable connection.
■ Settings location
"Extended" > "Multi-Projection" > "Simple Blending"
■ Details of item
・ Location Setup: Set the location of the primary projector
・ Whole Screen Aspect: Set the aspect ratio after blending
・ Start Auto Adjustment: Display is adjusted automatically using an external camera.
・ Screen Matching: Each display's color and brightness are corrected.
2) "Group tiling" menu layer has been added.
"Projector Grouping", "Tiling" and "Scale" have been moved to the "Group tiling" menu.
This is located within "Extended" > "Multi-Projection"
3) Epson Projector Professional Tool Ver. 1.50 support
・ Blending and Stacking Assist support.
・ Blending and Stacking assist support to curved area.
[Security update]
- OpenSSL module updated to 1.1.1n
[Bug Fix]
1)Fixed bug: Display could appear blueish for a short time after power on.
2)Fixed bug: Data for camera correction does not save in each color mode for color calibrations.
3)Fixed bug: Unable to power on after an abnormal standby when projector is in A/V standby mode.
4)The display quality is improved when 4K enhancement is set to "off" when using 4K signal.
5)Fixed a bug that Ch7 (electric zoom) could not be operated using Artnet.
6)Fixed a bug where "Dynamic Contrast" is not set to ”OFF” automatically after Screen Matching has been performed.
7)Fixed a bug in the Crestron page of the Web Control where "Issued to" and "Issued by" were displayed in reverse order.
8)When using the remote control to shift the lens, pressing the directional keys continuously will result in the same action as a long press, and may result in large movements.
9)Fixed a bug that prevented firmware update via network with Epson Projector Management V5.4.
10)Fixed a bug that caused the "II" error with the HDMI receiver at startup.
11)Screen flashes when adjusting HDR or HLG settings.
12)※EB-PU2220B/PU2120W only: Fixed the problem where dynamic contrast does not work when driven at AC100V. |
| WWV105.0 |
[Specification change]
[21:9] has been added to the Screen Type menu.
[Bug fix]
* EB-PU2113W/PU2213B, firmware version V104 only
Fixed bug that calibration is not executed even if "Light Source Calibration" is executed with "Run now" or "Run periodically" (including run by schedule setting). |
| WWV104.0 |
[Specification change]
1) Changed detection method for distortion lens operating range during lens calibration.
Fixed the distortion error that may occur when ELPLX02/ELPLX02S is installed.
2) Change the specifications of non-supported lens "ELPLU03,ELPLW05,ELPLM08,ELPLM09" to a supported lens.
[Feature improvement]
Fixed a bug where the color tone changed slightly immediately after the shutter was opened and the image started to be projected.
[Bug fixes]
Fixed the problem that "Temperature error" instead of "SE error" should occur when LD thermistor is not connected. |
| WWV103.0 |
Fixed bugs and functions are improved. |
| WWV102.1 |
Fixed bugs and functions are improved. |