WWV322.0 |
Fixed bugs and functions are improved. |
WWV321.0 |
[Bug fix only EB-800F/805F]
Fixed the bug in Content Playback mode: The projector powers On with fews seconds of delay.
[Feature improvement]
1. Add the item of "Basic control" in Network Setting.
Location: Network > Network Settings > Projector Control > Basic Control
Function: When using "Basic Control" function in Web Control, login by "Remote Password" is enable/disable.
2. Add the item of "Batch file write/read" in OSD menu.
Location: Initial/All Settings > Export/Import Batch Settings
Function: Enables export/import of batch setting file during unit is working, which was previously supported only by special key operations* during non-startup.
*Export: AC connect while pressing ESC button
Import: AC connect while pressing MENU button
[Usability improvement]
1. Changed a part of character of Chinese (Simplified) font from Gothic to Shouki Gothic for better visibility.
2. Changed the timing of setting "Web Control Password" and "Remote Password"
I. Web Control Password: Password to control/monitor the projector on the Web Control
Less than V3.20: Enter the Network Menu without setting a password.
V3.21 or above: Complete the Network Settings without setting a password.
II. Remote Password: Password only available in "Basic Control" on Web Control
Less than V3.20: Enter the Network Menu without setting a password
V3.21 or above: "Basic control" will be set from off to on without setting a password. |
WWV320.0 |
Fixed bugs and functions are improved. |
WWV319.0 |
Fixed bugs and functions are improved. |
WWV317.0 |
1. Feature improvement
1) Comply with "Chinese National Standard GB18030-2022*"
*It standardized new Chinese font
2. Bug fixes
1) Projector's operation may become unstable when the projector continuously receives control commands right after it receives "PWR ON" command via RS-232C. |
WWV316.0 |
Fixed bugs and functions are improved. |
WWV314.0 |
■Scanner Driver update
■Addition of the Touch Unit Setup Manual in the OSD Menu Setting
・This new settings allows the installer to fine tune manually (using the remote controller) the Touch Unit installation. A step by step guide is displayed on the screen. |
WWV313.0 |
■Error Message Improvement during Touch Unit setup
In case of Touch Unit setup failure
・Potential causes are identified and writen On Screen Display
■A bug is fixed about error message when saving data on a Network folder |
WWV312.0 |
■WLAN update
■Fixed bug about SNMP response |
WWV311.0 |
■Specification changes
・Addition of 2560x1080/60Hz resolution into EDID seting
. Addition of Mouse Button and Status indication into the Interactive Tool bar
. Addition of Freeze Button into the Interactive Tool bar (Request to EPSON is mandatory to enable the function) |
WWV310.0 |
■Touch Mute function improvement
When the Touch is muted; as long as the tip of the interactive pen is pressed in the drawing area, the Finger Touch cannot operate. Then an object like a ruler can be used to draw straight lines with a pen.
■Playback improvement with PC Free Function |
WWV303.0 |
■Improvement with iProjection
Enhancement of Search recognition in environments where
・Many computers have got iProjection installed
・[Standby mode] is set to [Communication On] |
WWV302.0 |
Fixed bugs and functions are improved. |
WWV301.0 |
Fixed bugs and functions are improved. |
WWV300.0 |
■Updates to Projector Menus
・Signal I/O
The display condition of the [A/V Output] setting is added
・Display Menu
A setting value is added to the [No-signal Screen] setting
The display condition of the [Home Screen Auto Disp.] setting is added
・Operation Menu
The display condition of the [Standby Mode] setting and the [Quick Startup] setting is added
・Network
The [Transmitter Settings] are added
The [Wireless LAN Sys.] setting is added
■Updates to User Operations
・You can use the Wireless Presentation System to Connect(Windows/Mac Computers)
■Fixed known issue |
WWV218.0 |
Fixed bug: The projector fails to start at some time. |
WWV217.0 |
Fixed bugs and functions are improved. |
WWV216.0 |
Fixed bugs and functions are improved. |
WWV215.0 |
Fixed bugs and functions are improved. |
WWV214.0 |
■Improvement to open .pdf file
.It becomes possible to open renamed file with extention written in capital letters (.PDF)
■Fixed issues
.No HDMI display with some device sources
.Not possible to save in .pdf format using the same name of a file already stored
.Not possible to save files in particular OSD Settings |
WWV210.0 |
■Updates to User Operations
・You can use additional Zoom options to change the whiteboard zoom ratio to
fit width or fit height during split screen projection.
・You can switch to the whiteboard screen using commands.
■Fixed known issue |
WWV200.0 |
Fixed several known issues. |