| WWV311.0 |
Fixed bugs and functions are improved. |
| WWV310.0 |
[Main FW]
1．Support for Epson Projector Professional Tool V1.60
Compatible with Camera Assist V200.
2．Expanded function to save log information when the camera function is executed to USB memory
*This information is not disclosed to customers as it is analysis function used during after service.
- We have fixed an issue where the following ESC/VP21 commands were both initialized simultaneously, although each should have been initialized independently according to the specifications.
Affected commands:
- HREVERSE
- VREVERSE |
| WWV300.0 |
[Main FW]
1．Added support for Miracast 2 as a source*.
Added the setting value 'No interruptions' to Secondary Connections.
* Miracast 2 becomes available when No interruptions is selected.
1．A message is displayed while the Time and Date settings, indicating that wireless functions will not work properly if the settings are not set correctly.
2．To improve visibility, the focused icon becomes larger on the home screen.
3. The input source name was displayed when the following settings were changed:
- Blanking
- Aspect
- Video Range
- Color Space
- Dynamic Range
- HDR10
- HLG
4．Changed the default setting of Secondary Connection to "Interruption OK".
- Fixed a bug where blending areas overlapped when the Blend Range value was too large.
- Fixed a bug where the image might freeze during Linearity adjustment when 4K Enhancement was enable.
- Fixed a bug where the projector might not turn on when connecting to AirPlay while in standby mode using a wired LAN connection.
- Supplemental texts are cut off in the menu when using a 4:3 Screen Type.
- Fixed a bug where only up to five IPv6 stateless addresses were displayed when using a wired connection.
- Fixed a bug where source switching took a long time when using the Epson Projector Professional Tool.
- Fixed a bug where image positions were not properly aligned when using the Split Screen function with a 4:3 Screen Type.
- Fixed a bug where the Freeze Capture function might not be used when Screen Sharing was enabled.
- Fixed a bug where the adjustment points were not displayed correctly during Geometric Correction via the Epson Projector Professional Tool when using a Screen Type other than 16:10.
- Fixed a bug where the focus might disappear on the Home screen when Content Playback was enabled.
- Fixed a bug where the USB preview image on the Home screen was not displayed correctly when the Screen Position was changed.
- Fixed a bug where the Access Control value was not initialized when performing Reset Network Settings.
- Fixed a bug where an incorrect dialog was displayed when pressing the Enter button while adjusting the Screen Position.
- Fixed a bug where Firmware Update set. in the initial setup wizard are not displayed on ECC models.
- Fixed a bug where some stateless addresses might not respond to ping when using a wireless LAN with an IPv6 connection.
- Fixed a bug where the displayed device name might be incorrect when the connection was interrupted with the following settings:
[Settings]
- Access Control: Off
- Secondary Connections: Interruptions OK |
| WWV201.0 |
Fixed bugs and functions are improved. |
| WWV200.0 |
[Main FW]
1) Measures to Comply with the Radio Equipment Directive (RED):
1. Implement countermeasures against brute-force attacks on ESC/VP.net.
2. Remove the menu for setting the Crestron Connected password.
3. Restrict projector usage suspension functionality to authentication via the Web Control Password only (authentication via the Monitor Password is not allowed).
4. Block ESC/VP.net commands that affect security, assets, and network resources.
5. Implement countermeasures against brute-force attacks on the web server functionality.
6. Change the minimum and maximum character limits for "Remote Password," "Web Control Password," and "Passphrase" to 8 and 32 characters, respectively.
7. Secure (encrypt) the firmware. Firmware that is not secured cannot be updated.
1) Add a feature to import the certificate used for Crestron connection into the projector.
2) Redesign the Home Menu.
3) Modify the error message displayed when screen matching fails in the Epson Projector Professional Tool.
4) Add 15/30 seconds as options for the sleep mode timer setting.
1) Startup process could take longer than usual after powering on.
2) IPv6 connections over wireless LAN could fail.
3) Enabling Simple AP and attempting to connect via iProjection's Easy Mode would fail.
4) Crestron XiO Cloud feature might not function even when connected to the internet.
5) Projectors connected via wired or wireless LAN could not be registered.
6) Simple Blending could fail on the first attempt. |