| WWV161.0 |
[Bug fixes]
1. Fixed the bug that allowed the projector to output images even when it was prohibited, if a specific operation was performed. |
| WWV160.0 |
[Feature improvement]
1. Supports Epson Projector Management Connected V2.0
[Usability improvement]
1. The following items of usability improvement related to PSTI Law
- Users can set Monitor Password*1 from the OSD menu.
[Network settings]>[Projector Control]
- If Monitor Password has not been set when users have set “Command Communication”
to “Compatible”, a dialog to set Monitor Password will pop up.
- Users can choose whether to set Web Control password as needed, not mandatory.
If the following condition, display the dialog to promote to set Web Control Password
- Web Control Password: have not set
- Complete Network settings
*1: You can set it when Command Communication is "Compatible" only.
[Bug fixes]
Fixed the bugs as the following:
1. The blend range can be set even over the maximum value.
2. Camera feature might be frozen due to remove cable of ELPEC01 just after performing camera assist.
3. Image quality might not be rolebacked when selecting [Redo] after performing Screen Matching.
4. All Color Uniformity can not be adjusted in Web control if the adjustment level from 2 to 8 is not the same value.
5. The laser may turn off after the EPSON logo is displayed.
6. Light Source Calibration may not reach the desired result.
7. In Epson Projector Management Connected, if proxy username includes "&", the export setting may fail. |
| WWV151.0 |
[Bug fixes]
Fixed bugs as follows:
1) Laser warning may occur during startup or when changing the brightness.
2) When a HDMI signal is input into the projector, it may display a black screen.
(Additional countermeasures have been added from V1.13 and V1.11) |
| WWV150.0 |
Fixed bugs and functions are improved. |
| WWV114.0 |
Fixed bugs and functions are improved. |
| WWV113.0 |
[Bug fixes]
Fixed bugs as follows:
1) When a HDMI signal is input into the projector, it may display a black screen.
(Additional countermeasures have been added from V1.11).
2) When using HDMI output, the projector may display a black screen on the output HDMI display. |
| WWV112.0 |
[Bug fixes]
V1.12 include additional bug fixes relating to V1.10:
6) Sometimes when switching the input signal, the projector image is not displayed (V1.10) |
| WWV111.0 |
[Feature improvement]
1) Compliant with Chinese national standard GB18030-2022.
2) Time out timing of tiling arrangement settings is added as follows.
- Manual: 90 sec
- Auto: 360 sec
[Usability improvement]
1) A dialog of auto adjustment of simple blending is compliant with all languages.
[Bug fixed]
Fixed bugs as follows:
1) After network settings are initialized, the network settings reset process works even though you select "NO" in the confirmation dialog of the network settings menu.
2) Sometimes when the HDMI signal is input to the projector, it will display a black screen. |
| WWV110.0 |
[Feature improvement]
1) Epson Projector Professional Tool Ver. 1.50 support
・ Blending and Stacking Assist Support
・ Blending and Stacking Assist Support to curved area
2) The specifications are improved to comply with the Policy for a new cyber laws in UK "Product Security and Telecommunications Infrastructure Act 2022".
[Usability improvement]
1) Max grouping units' quantity increases from 8 to 14 by using web control.
2) The adjusted pattern of "Simple blending" was changed.
- Addition of T-mark as a guide for adjustment.
- The explanation dialog for adjustment was changed as below.
Adjust the projection positions of the two projectors so that the T fits within the white area created by overlapping the green pattern and the magenta pattern.
- When adjusting the display's shapes, the color of the selected cross anchor was changed to orange.
3) The EPSON logo has been updated.
[Bug fixes]
Fixed bugs as follows:
1) "Dynamic Contrast" is not set to ”OFF” automatically after "Screen Matching".
2) "LD temperature error" instead of "SE error" should occur when LD thermistor is not connected.
3) Epson Projector Professional Tool cannot get the projector status when projector state is in network standby.
4) Display distorted after edge blending with other projector series using ELPLX01/02/03 series lens.
5) Even though the password protect setting is ON, remote and web control passwords are reset when performing factory reset.
6) Sometimes when switching the input signal, the projector image is not displayed. |