| WWV240.0 |
1.Security update
Countermeasures against Brute-force attacks.
If the password(*) is incorrect when connecting to the projector using a web browser or ESC/VP.net, access from the same IP address will be restricted for 2 seconds.
(*) Passwords: "Remote Password", "Web Control Password", "Monitor Password"
2.Feature improvement
Tamper Prevention
- Projection Confirmation Dialog
When a device connects, a confirmation message for connection permission will appear on the projection screen.
Select "Yes" to project.
Select "No" to close the dialog.
If "Add to Block List" is selected, the device will be added to the block list.
- Removed the "Interrupt Connection*" menu.
"Interrupt Connection" will be replaced with the following two options: "Access Control" and "Secondary Connections."
*Network Settings > Network Projection > Interrupt Connection
- Added "Access Control" menu setting
Under "Access Control", you can change whether the above "Projection Confirmation Dialog" is displayed.
- Added "Secondary Connections" menu setting
Under "Secondary Connections", you can change the setting for when a second device connects.
If "No Interruptions" is selected, you can use Screen Mirroring2.
- Added Block List Deletion Function
If there are devices on the block list, you can delete them from the standby screen and Home screen.
On the standby screen, pressing Enter will display a confirmation message for deleting the block list.
(If there are no entries on the block list, the removal prompt will not be displayed.)
The block list removal icon will be displayed on the Home screen.
- Added Forced Disconnection Feature
A feature has been added to forcefully disconnect while using Screen Mirroring.
Press and hold the Esc button to switch back to the projection screen.
3.Bug fixes
Crestron Connected V2 may become unusable when starting up the projector after updating the projector's firmware.
*If this issue occurs, restart the projector to restore functionality. |
| WWV238.0 |
■Feature improvement
・H.265 codec added in supported format to fix Screen Mirroring issues
・Support USB Display Ver.1.83 (Win/Mac) |
| WWV236.0 |
1.Feature improvement
Supports USB Display version 1.80(Win)/1.77(Mac)
2.Bug fixes
1) Playlist file in Content Playback mode is not shown on the OSD menu when turning on projector under the following conditions.
- Auto Power On : On (Network -> Transmitter Settings -> Auto Power On)
2) An error code "0899" is shown in "Event ID" under "Information" menu when turning on the projector under the following conditions.
- SimpleAP : Off (Network settings -> SimpleAP)
- Accesss Point(SSID) : not selected (Network settings -> WirelessLAN -> Search Access Point)
3) An error message "Authentication failed" is shown in LAN information as shown below when turning on the projector under the following conditions.
- SimpleAP : Off (Network settings -> SimpleAP)
- Accesss Point(SSID) : not selected (Network settings -> WirelessLAN -> Search Access Point) |
| WWV235.0 |
■Correction of a minor bug with CRESTRON Web Control in WLAN connection |
| WWV234.0 |
Fixed bugs and functions are improved. |
| WWV231.0 |
Playback improvement with PC Free Function |
| WWV221.0 |
■Improvement with iProjection
Enhancement of Search recognition in environments where
・Many computers have got iProjection installed
・[Standby mode] is set to [Communication On]
■Support Freeze function of Crestron Connected Version 2 |
| WWV220.0 |
■Playback PC Free bug fix with H264/265 contents |
| WWV210.0 |
Fixed bugs and functions are improved. |
| WWV200.0 |
■Updates to Projector Menus
・Signal I/O
The display condition of the [A/V Output] setting is added
・Display Menu
A setting value is added to the [No-signal Screen] setting
The display condition of the [Home Screen Auto Disp.] setting is added
・Operation Menu
The display condition of the [Standby Mode] setting and the [Quick Startup] setting is added
・Network
The [Transmitter Settings] are added
The [Wireless LAN Sys.] setting is added
■Updates to User Operations
・You can use the Wireless Presentation System to Connect（Windows/Mac Computers）
■Fixed known issue |
| WWV124.0 |
Fixed bug: The projector fails to start at some time. |
| WWV123.0 |
Fixed bugs and functions are improved. |
| WWV122.0 |
Fixed bugs and functions are improved. |
| WWV121.0 |
■Fixed issues
.No HDMI display with some device sources
.No Power On via Network in particular OSD Settings
.iProjection display issue in particular OSD Settings
|
| WWV120.0 |
■Fix a bug occuring after the firmware V110 update
.By mistake the default setting of the Simple AP has been set Off instead to On. The consequence is that an Event ID could be seen in the Information sub menu.
.It doesn't affect the functionnality.
|