WWV511.0 |
# (RED 1) to (RED 4) are responses to the European Radio Equipment Directive (RED).
(RED 1) The minimum number of characters for "Remote Password" and "Web Control Password" has been changed.
Before : Minimum number of characters is 0, maximum number of characters is 32
After : Minimum number of characters is 8, maximum number of characters is 32
(RED 2) If the "Remote Password", "Web Control Password", or "Passphrase" for Simple AP is set to 7 characters or fewer, the following message will be displayed.
Before : Not displayed
After : The following message will be displayed.
"Enter a password using at least 8 characters."
(RED 3) Measures against Brute-force attacks.
If the password(*) is incorrect when connecting to the projector using a web browser or ESC/VP.net, access from the same IP address will be restricted for 2 seconds.
(*) Passwords: "Remote Password", "Web Control Password", "Monitor Password"
(RED 4) Limitation on firmware downgrading.
To enhance security, downgrading from V511 or later is no longer possible. If you attempt to do so, the projector's LEDs will flash rapidly, and the downgrade will always fail.
* Note that a downgrading is not supported.
1. The specification for Remote Camera Access has been updated.
- The Remote Camera Access password has been deleted.
- When capturing via Remote Camera Access through Web Control, the confirmation process with the Remote Camera Access password has been removed.
- The default setting for Remote Camera Access in Password Protect has been changed to OFF. |
WWV510.0 |
[Feature improvement]
1) Support for Epson Projector Management Connected V2.0
2) Specification change the following password settings
① Monitor password
・ Added a setting item for "Monitor Password" to the menu.
[Network settings] -> [Basic] -> [Monitor Password]
・ If the following condition, display the dialog to set the Monitor Password
- Monitor Password: have not set
- Command Communication set to "Compatible"
② Web control password
If the following condition, display the dialog to promote to set Web Control Password
- Web Control Password: have not set
- Complete Network settings
[Yes]: Move to set the Web Control Password
[No]: Complete the Network settings with no set Web Control Password
[Bug fixes]
1) Fixed the issue where selecting 'Redo' or 'Undo' after color calibration sometimes does not achieve the desired image quality. |
WWV503.0 |
Fixed bugs and functions are improved. |
WWV502.0 |
[Feature improvement]
1) The words in the dialog displayed by executing Export/Import Batch settings of OSD menu have been changed.
[Bug fixes]
1) Fixed an symptom that the stacking would be misaligned with "Geometric Distortion Correction Assist - Curved Surface Stacking Assist" executed in EPPT. |
WWV501.0 |
[Feature improvement]
1) The specifications are improved to comply with the Policy for a new cyber laws in UK "Product Security and Telecommunications Infrastructure Act 2022".
2) Add the item of "Basic control" in Network Configuration.
Location: Network > Network Configuration > Other > Basic Control
Function: When using "Basic Control" function in Web Control, login by "Remote Password" is enable/disable.
3) Add the item of "Batch Setting file write/read" in OSD menu.
Location: Info > Export/Import Batch Settings
Function: Enables export/import of batch setting file during unit is working, which was previously supported only by special key operations* during non-startup.
*Export: Connect the power cord while pressing the [ESC] button.
Import: Connect the power cord while pressing the [MENU] button.
[Usability improvement]
1) Changed the timing of setting "Web Control Password" and "Remote Password"
1-1) Web Control Password: Password to control/monitor the projector on the Web Control
Less than V5.01: Enter the Network Menu without setting a password.
V5.01 or above: Complete the Network Settings without setting a password.
1-2) Remote Password: Password only available in "Basic Control" on Web Control
Less than V5.01: Enter the Network Menu without setting a password
V5.01 or above: "Basic control" will be set from off to on without setting a password.
2) Add the language Vietnam.
[Bug fixes]
1) Firmware update via EPM(Epson Projector Management) may fail.
2) Fixed a bug where a laser warning may occur under the following conditions.
The brightness decreases after a certain period of time in the No signal state.
Execute AV mute (shutter) at that timing.
3) EventID:0899 occurs when "Simple AP: Off" and "Access Point (SSID): empty (default value)"
4) Turning off the projector occasionally takes a few tens of seconds when using Content Playback mode. |
WWV500.0 |
【Feature improvement】
1) Epson Projector Professional Tool Ver. 1.50 support
・ Blending and Stacking assist support
・ Blending and Stacking assist support to curved area
2) Update to EPSON startup logo
[Bug fixes]
1) The display quality is improved when feeding 4K signal with "4K enhancement : Off"
2) Fixed bug could the display is blueish short time on power on.
3) Fixed rare symptom that black screen was displayed when HDMI signal was input to the projector. |
WWV411.0 |
Fixed bugs and functions are improved. |
WWV410.0 |
Fixed bugs and functions are improved. |
WWV401.0 |
Fixed bugs and functions are improved. |
WWV400.0 |
Fixed bugs and functions are improved. |
WWV106.0 |
Fixed bugs and functions are improved. |
WWV105.0 |
Fixed bugs and functions are improved. |
WWV103.0 |
Fixed bugs and functions are improved. |