| WWV240.0 |
1.Security update
1) Countermeasures against Brute-force attacks.
If the password(*) is incorrect when connecting to the projector using a web browser or ESC/VP.net, access from the same IP address will be restricted for 2 seconds.
(*) Passwords: "Remote Password", "Web Control Password", "Monitor Password"
[Feature improvement]
2.Feature improvement
1)Tamper Prevention
- Projection Confirmation Dialog
When a device connects, a confirmation message for connection permission will appear on the projection screen.
Select "Yes" to project.
Select "No" to close the dialog.
If "Add to Block List" is selected, the device will be added to the block list.
- Removed the "Interrupt Connection*" menu.
"Interrupt Connection" will be replaced with the following two options: "Access Control" and "Secondary Connections."
*Network Settings > Network Projection > Interrupt Connection
- Added "Access Control" menu setting
Under "Access Control", you can change whether the above "Projection Confirmation Dialog" is displayed.
- Added "Secondary Connections" menu setting
Under "Secondary Connections", you can change the setting for when a second device connects.
If "No Interruptions" is selected, you can use Screen Mirroring2.
- Added Block List Deletion Function
If there are devices on the block list, you can delete them from the standby screen and Home screen.
On the standby screen, pressing Enter will display a confirmation message for deleting the block list.
(If there are no entries on the block list, the removal prompt will not be displayed.)
The block list removal icon will be displayed on the Home screen.
- Added Forced Disconnection Feature
A feature has been added to forcefully disconnect while using Screen Mirroring.
Press and hold the Esc button to switch back to the projection screen.
3.Bug fixes
1) Crestron Connected V2 may become unusable when starting up the projector after updating the projector's firmware.
*If this issue occurs, restart the projector to restore functionality.
2) Finger touch function may work even when the finger touch unit was not connected (Finger touch unit's power was OFF or the touch unit was not connected). |
| WWV238.0 |
1. Feature improvement
(1)Disable the H.265 codec when using Screen Mirroring. This is a fix for the issue where the projector will not be able to display and connect if a PC sends video encoded in the H.265 format that the projector does not support.
(2) Support USB Display Ver.1.83 (Win/Mac)
(3)Implemented countermeasures to the issue of jagged lines using a pen. In case of behaviour, turn On the function described below.
< Phenomenon >
- When trying to draw a straight line with the pen, the line may be jagged or broken, or the toolbox may suddenly appear.
- The issue may not be resolved even if the projector is unplugged for several minutes, but may be resolved by unplugging the projector for 5 minutes or more.
< Turn on the countermeasure function. >
- Select [Pen/Touch]‐[PC Interactivity]‐[Pen Tracking Mode] from the OSD menu.
- Hold down the right button for 5 seconds or more.
- When you hear one beep, set to ON completed.
< Turn off the countermeasure function. >
- Select [Pen/Touch]‐[PC Interactivity]‐[USB-B2] from the OSD menu.
- Hold down the right button for 5 seconds or more.
- When you hear one beep, set to OFF completed.
< Check the ON/OFF setting. >
- Select [Pen/Touch]‐[PC Interactivity] from the OSD menu.
- Hold down the right button for 5 seconds or more.
- You'll know it's set to ON when you hear one beep.
- You'll know it's set to OFF when you hear two beeps. |
| WWV237.0 |
[Bug fix]
1. Projector's operation may become unstable when the projector continuously receives control commands right after it receives "PWR ON" command via RS-232C.
2. Firmware update via EPM (Epson Projector Management) may fail.
3. When turning On the projector, network setting function may not work properly.
4. Document Camera: When selecting zoom area with interactive pen, actual zoom position does not match with the selected area.
[Feature improvement]
1. Support USB Display Version 1.81 (Win/MAC). |
| WWV236.0 |
1.Feature improvement
1) Supports new document camera ELPDC30
2) Supports USB Display version 1.80(Win)/1.77(Mac)
3) Newly added "Touch Mode" to "Pen Tracking Mode" (Pen/Touch->PC Interactivity->Pen Tracking Mode)
- Touch Mode function: The computer recognizes a touch pen as a pen digitizer.
- Background of the change: When a user flicks left and right with a pen in PowerPoint slideshow, it is not possible to move a page forward / backward. However, it can be done with the finger touch. This is a PowerPoint specification. PowerPoint distinguishes between a pen (pen digitizer) and a finger (touch digitizer) and changes the operation. By operating the pen as the touch digitizer, the user can operate the page forward / backward with the pen.
- Limitations in "Touch Mode"
a. Excludes touch mute.
b. Mac OS is not supported (pen operations are ignored) because the OS does not recognize the projector as a touch device.
c. Hovering icon is not visible on PC.
d. Promethean needs to be used in "mouse mode".
4)Add "Mouse button" and "Status indicator" to Interactive tool bar.
2.Bug fixes
1) Playlist file in Content Playback mode is not shown on the OSD menu when turning on projector under the following conditions.
- Auto Power On : On (Network -> Transmitter Settings -> Auto Power On)
2) An error code "0899" is shown in "Event ID" under "Information" menu when turning on the projector under the following conditions.
- SimpleAP : Off (Network settings -> SimpleAP)
- Accesss Point(SSID) : not selected (Network settings -> WirelessLAN -> Search Access Point)
3) An error message "Authentication failed" is shown in LAN information as shown below when turning on the projector under the following conditions.
- SimpleAP : Off (Network settings -> SimpleAP)
- Accesss Point(SSID) : not selected (Network settings -> WirelessLAN -> Search Access Point) |
| WWV235.0 |
■Scanner Driver update
■Addition of the Touch Unit Setup Manual in the OSD Menu Setting
・This new settings allows the installer to fine tune manually (using the remote controller) the Touch Unit installation. A step by step guide is displayed on the screen
■Correction of a minor bug with CRESTRON Web Control in WLAN connection |
| WWV233.0 |
■Error Message Improvement during Touch Unit setup
In case of Touch Unit setup failure
・Potential causes are identified and writen On Screen Display
■A bug is fixed about error message when saving data on a Network folder |
| WWV232.0 |
■The projector does not turn by using a power switch is some conditions
■Fixed bug about SNMP response |
| WWV231.0 |
Playback improvement with PC Free Function |
| WWV230.0 |
■Touch Mute function improvement
When the Touch is muted; as long as the tip of the interactive pen is pressed in the drawing area, the Finger Touch cannot operate. Then an object like a ruler can be used to draw straight lines with a pen. |
| WWV221.0 |
■Improvement with iProjection
Enhancement of Search recognition in environments where
・Many computers have got iProjection installed
・[Standby mode] is set to [Communication On]
■Support Freeze function of Crestron Connected Version 2 |
| WWV220.0 |
■Improvement of the Interactive Tool Bar
Addition of
・Mouse button
・Status indicator [Pens & Touch]
■Playback PC Free bug fix with H264/265 contents |
| WWV210.0 |
Fixed bugs and functions are improved. |
| WWV201.0 |
■Specification change
・Addition of Freeze Button into the Interactive Tool bar (Request to EPSON is mandatory to enable the function) |
| WWV200.0 |
■Updates to Projector Menus
・Signal I/O
The display condition of the [A/V Output] setting is added
・Display Menu
A setting value is added to the [No-signal Screen] setting
The display condition of the [Home Screen Auto Disp.] setting is added
The Menu Color setting is added
・Operation Menu
The display condition of the [Standby Mode] setting and the [Quick Startup] setting is added
・Network
The [Transmitter Settings] are added
The [Wireless LAN Sys.] setting is added
・Interactive（EB-735Fi/EB-725Wi）
The [Toolbar Color] setting is added
■Updates to User Operations
・You can use the Wireless Presentation System to Connect（Windows/Mac Computers）
・You can use additional Zoom options to change the whiteboard zoom ratio
to fit width or fit height during split screen projection（EB-735Fi/EB-725Wi）
・The Crestron Connected feature bundled in the projector is upgraded
■Fixed known issue |
| WWV124.0 |
Fixed bug: The projector fails to start at some time. |
| WWV123.0 |
Fixed bugs and functions are improved. |
| WWV121.0 |
■Improvement to open .pdf file
.It becomes possible to open renamed file with extention written in capital letters (.PDF)
■Fixed issues
.No HDMI display with some device sources
.Not possible to save in .pdf format using the same name of a file already stored
.Not possible to save files in particular OSD Settings |
| WWV120.0 |
■Updates to User Operations
·You can use additional Zoom options to change the whiteboard zoom ratio to fit width or fit height during split screen projection.
.You can change the color of the interactive tool bar.
■Supported Crestron Connected Version 2
■Fixed issues
.Few Network behaviours
.Few Whiteboard behaviours
.24p signal unexpected behaviour (HDMI source)
.H264 content's image artefact (PC free function)
|