| M2V931.0 |
[Main FW]
1)Fixed an issue where, during communication with Control4, switching the network connection from wireless to wired caused the projector to stop receiving SearchResponse packets and continue sending packets over the wireless connection.
2)Fixed an issue where the wireless LAN LED remained off after transitioning from an abnormal state when wireless LAN was disabled after power-off.
3)Fixed an issue where a Network Update from EPM/EPMC failed when performed from a PC on the same network over a wireless LAN while the Preferred Control Interface was set to Wired.
4)Fixed an issue where updating the projector firmware from EPMC without an agent PC failed when using a wireless LAN connection.
5)Fixed an issue where PJLink was enabled if the password entry dialog was canceled when changing the PJLink setting from Off to On.
6)Fixed an issue where the wireless LAN LED remained lit after changing settings via EPMC.
1)Added the LCD Alignment feature.
2)Updated the library used for Crestron XiO Cloud connectivity to Version 1.13.0.
3)Changed the License Agreement screen URL to a dedicated URL for projectors sold in Austrailia only (to comply with the Australian Consumer Law).
4)Added "Internet Time Setting" and "Date & Time" to the Initial Setup Wizard.
[Android]
1)Connection fails when the Miracast source device name contains a comma [,].
2)The projector can still connect to an access point even when Wireless Power is set to Off (the wireless LED starts blinking).
3)After screen mirroring is performed using an iProjection app other than the Chrome version, if mirroring is then performed using the Chrome version of the iProjection app, no image is displayed and the app disconnects.
4)Fixed an issue where firmware updates performed using EPM or EPMC could fail when the network was configured with EAP-TLS or PEAP authentication.
5)After changing the sales destination setting and performing a power cycle, the Wireless Region displayed in the Wireless LAN Information screen reverts to the value from before the sales destination change.
6)After waking up from Eco Standby, selecting Access Point Search does not display the list of detected access points.
7)When multiple access points are available and an AP search is performed from the Wireless LAN menu, the SSID of AP3 is displayed as garbled text.
8)Improved video latency and stuttering during Miracast operation.
9)The information registered on the Google Analytics server contains incorrect Serial Number and User ID values.
10)The projector cannot synchronize the date and time via the Internet over a wireless LAN connection.
1)To prevent unintended operation, remove the "Done" message from the firmware update screen and set the initial focus to the "Exit" button.
2)Add an "Exit" button to the Android firmware update screen when updating via USB Type-A (USB flash drive).
3)Allow Android firmware downgrades via USB update. (OTA updates will continue to disallow firmware downgrades.)
4)Update the Security Patch Level to October 5, 2025.
5)Increase the size of the buttons on the USB update screen and make the change in button size when selected more noticeable. |
| M2V930.3 |
[Main FW]
This issue has been fixed where, in rare cases, the projected image remained black after a dark full-screen image was displayed for a short period of time. |
| M2V930.0 |
[Main FW]
1．Added support for Miracast 2 as a source*.
Added the setting value 'No interruptions' to Secondary Connections.
* Miracast 2 becomes available when No interruptions is selected.
1．A message is displayed while the Time and Date settings, indicating that wireless functions will not work properly if the settings are not set correctly.
2．To improve visibility, the focused icon becomes larger on the home screen.
3. The input source name was displayed when the following settings were changed:
- Blanking
- Aspect
- Video Range
- Color Space
- Dynamic Range
- HDR10
- HLG
4．Changed the default setting of Secondary Connection to "Interruption OK".
- Fixed a bug where blending areas overlapped when the Blend Range value was too large.
- Fixed a bug where the image might freeze during Linearity adjustment when 4K Enhancement was enable.
- Fixed a bug where the projector might not turn on when connecting to AirPlay while in standby mode using a wired LAN connection.
- Supplemental texts are cut off in the menu when using a 4:3 Screen Type.
- Fixed a bug where only up to five IPv6 stateless addresses were displayed when using a wired connection.
- Fixed a bug where source switching took a long time when using the Epson Projector Professional Tool.
- Fixed a bug where image positions were not properly aligned when using the Split Screen function with a 4:3 Screen Type.
- Fixed a bug where the Freeze Capture function might not be used when Screen Sharing was enabled.
- Fixed a bug where the adjustment points were not displayed correctly during Geometric Correction via the Epson Projector Professional Tool when using a Screen Type other than 16:10.
- Fixed a bug where the focus might disappear on the Home screen when Content Playback was enabled.
- Fixed a bug where the USB preview image on the Home screen was not displayed correctly when the Screen Position was changed.
- Fixed a bug where the Access Control value was not initialized when performing Reset Network Settings.
- Fixed a bug where an incorrect dialog was displayed when pressing the Enter button while adjusting the Screen Position.
- Fixed a bug where Firmware Update set. in the initial setup wizard are not displayed on ECC models.
[Android]
1. Improved the behavior where HomeKit was not disconnected when only the projector name was changed.
- Fixed a bug where some stateless addresses might not respond to ping when using a wireless LAN with an IPv6 connection.
- Fixed a bug where the displayed device name might be incorrect when the connection was interrupted with the following settings:
[Settings]
- Access Control: Off
- Secondary Connections: Interruptions OK |
| M2V930.0 |
[Main FW]
1．Support for Epson Projector Professional Tool V1.60
Compatible with Camera Assist V200.
2．Expanded function to save log information when the camera function is executed to USB memory
*This information is not disclosed to customers as it is analysis function used during after service.
- We have fixed an issue where the following ESC/VP21 commands were both initialized simultaneously, although each should have been initialized independently according to the specifications.
Affected commands:
- HREVERSE
- VREVERSE |
| M2V930.0 |
[Main FW]
1. Fixed a bug that could cause a PV error due to internal processing failure.
2. Fixed a bug where changes to the [Authentication] and [Encryption Type] settings were not applied unless the projector was restarted when SNMPv3 was enabled in the network settings.
3. Fixed a bug that could cause a YE error when the projector is started in a low-temperature environment, even though no abnormality is present.
4. Fixed a bug that prevented changes to the [EAP Type] setting from being applied via Web Control.
5. Fixed a bug that caused the projector to output a private MAC address |
| M2V920.0 |
[Main FW]
1) Measures to Comply with the Radio Equipment Directive (RED):
1. Implement countermeasures against brute-force attacks on ESC/VP.net.
2. Remove the menu for setting the Crestron Connected password.
3. Restrict projector usage suspension functionality to authentication via the Web Control Password only (authentication via the Monitor Password is not allowed).
4. Block ESC/VP.net commands that affect security, assets, and network resources.
5. Implement countermeasures against brute-force attacks on the web server functionality.
6. Change the minimum and maximum character limits for "Remote Password," "Web Control Password," and "Passphrase" to 8 and 32 characters, respectively.
7. Secure (encrypt) the firmware. Firmware that is not secured cannot be updated.
1) Changes to IPv6 ON/OFF specifications:
1. The IPv6 ON/OFF setting will be unified for both wireless LAN and wired LAN.
2. Remove the IPv6 setting option from the network configuration section (wireless and wired) in the initial setup wizard.
3. When updating the firmware from version V1xx to V2xx or later, if IPv6 is enabled on either wireless LAN or wired LAN in V1xx, IPv6 will be enabled in the unified setting for both wireless and wired LAN after the update.
2) When the device is initialized to factory default settings with network protection enabled, network settings should not be configurable during the initial setup.
3) Add a feature to import the certificate used for Crestron connection into the projector.
4) Redesign the Home Menu.
5) Modify the error message displayed when screen matching fails in the Epson Projector Professional Tool.
6) Add 15/30 seconds as options for the sleep mode timer setting.
1) "Firmware Update Settings" could be changed via web control while in standby mode.
2) Startup process could take longer than usual after powering on.
3) Projectors might fail to start when connected to certain access points.
4) Projectors might not be detected when searched via iProjection.
5) IPv6 connections over wireless LAN could fail.
6) Email notifications were not sent even after being configured.
7) Enabling Simple AP and attempting to connect via iProjection's Easy Mode would fail.
8) Projectors might not appear in Epson Projector Management Connected(EPMC).
9) Wireless LAN address might be displayed under the following settings:
・Preferred Control Interface: Wireless LAN
・Control4: ON
10) The Crestron XiO Cloud feature might not function even when connected to the internet.
11) Projectors connected via wired or wireless LAN could not be registered.
12) Notifications were not sent to the projector when using PJLink.
13) Firmware updates via EPM (Epson Projector Management) could fail.
14) The screen could not be shared when the source was set to LAN in iProjection.
15) Messages from EPM were not displayed on the projector when connected wirelessly to PC.
16) Simple Blending could fail on the first attempt.
17) Changing the display zoom while multiple signals were input could cause screen noise.
[Android]
1) Specification Changes Due to AirPlay Support:
1. Changes and additions to the home and menu.
2. Modify the initial setup flow to allow network configuration to be completed first.
3. Change the priority of network settings.
4. Update the screen and text displayed during device startup standby.
5. Add a user interface that guides users to network settings when AirPlay is selected as the source before activation. |
| M2V920.0 |
Fixed bugs and functions are improved. |
| M2V911.0 |
Fixed bugs and functions are improved. |
| M2V911.0 |
[Main FW]
- Update the certification file to enable connection via FITC* of Crestron Fusion.
* A connection method: Fusion in The Cloud
[Android]
No update |