M2V920.0 |
[Main FW]
1) Measures to Comply with the Radio Equipment Directive (RED):
1. Implement countermeasures against brute-force attacks on ESC/VP.net.
2. Remove the menu for setting the Crestron Connected password.
3. Restrict projector usage suspension functionality to authentication via the Web Control Password only (authentication via the Monitor Password is not allowed).
4. Block ESC/VP.net commands that affect security, assets, and network resources.
5. Implement countermeasures against brute-force attacks on the web server functionality.
6. Change the minimum and maximum character limits for "Remote Password," "Web Control Password," and "Passphrase" to 8 and 32 characters, respectively.
7. Secure (encrypt) the firmware. Firmware that is not secured cannot be updated.
1) Changes to IPv6 ON/OFF specifications:
1. The IPv6 ON/OFF setting will be unified for both wireless LAN and wired LAN.
2. Remove the IPv6 setting option from the network configuration section (wireless and wired) in the initial setup wizard.
3. When updating the firmware from version V1xx to V2xx or later, if IPv6 is enabled on either wireless LAN or wired LAN in V1xx, IPv6 will be enabled in the unified setting for both wireless and wired LAN after the update.
2) When the device is initialized to factory default settings with network protection enabled, network settings should not be configurable during the initial setup.
3) Add a feature to import the certificate used for Crestron connection into the projector.
4) Redesign the Home Menu.
5) Modify the error message displayed when screen matching fails in the Epson Projector Professional Tool.
6) Add 15/30 seconds as options for the sleep mode timer setting.
1) "Firmware Update Settings" could be changed via web control while in standby mode.
2) Startup process could take longer than usual after powering on.
3) Projectors might fail to start when connected to certain access points.
4) Projectors might not be detected when searched via iProjection.
5) IPv6 connections over wireless LAN could fail.
6) Email notifications were not sent even after being configured.
7) Enabling Simple AP and attempting to connect via iProjection's Easy Mode would fail.
8) Projectors might not appear in Epson Projector Management Connected(EPMC).
9) Wireless LAN address might be displayed under the following settings:
・Preferred Control Interface: Wireless LAN
・Control4: ON
10) The Crestron XiO Cloud feature might not function even when connected to the internet.
11) Projectors connected via wired or wireless LAN could not be registered.
12) Notifications were not sent to the projector when using PJLink.
13) Firmware updates via EPM (Epson Projector Management) could fail.
14) The screen could not be shared when the source was set to LAN in iProjection.
15) Messages from EPM were not displayed on the projector when connected wirelessly to PC.
16) Simple Blending could fail on the first attempt.
17) Changing the display zoom while multiple signals were input could cause screen noise.
[Android]
1) Specification Changes Due to AirPlay Support:
1. Changes and additions to the home and menu.
2. Modify the initial setup flow to allow network configuration to be completed first.
3. Change the priority of network settings.
4. Update the screen and text displayed during device startup standby.
5. Add a user interface that guides users to network settings when AirPlay is selected as the source before activation. |